Examining Infrared Drying Solutions For Your Prep Area

Posted by Gascat Dryers on Sep 13, 2019 7:27:03 PM
Find me on:

When examining solutions to increase production in the paint shop, all the emphasis is placed on the paint booth. The paint booth is the most noticeable piece of equipment in the shop, the most expensive, and the one that can make or break production. The right paint booth solution and paint shop layout can increase your throughput and keep your productivity goals on track. But there is still another area where productivity gains are easily found, and that is in the prep area. 

CTOF-2-1170x637

No matter what your shop layout is, you have to have some area to prime and prep cars for paint. Some shops have several of these grouped among the paint booth. Since 99% of your repairs are only going to involve a few panels, your prep deck is the area where you spot prime and sand panels before final paint. In a pinch, you may even paint a panel in the prep area during high volume periods. Even in a pinch, you may also paint the occasional panel during high volume periods. Your prep deck allows you to push more work through the shop, by acting like the paint booth’s helper. What if there was a way to turn one prep deck into two perhaps even three or more prep decks without adding any additional filters, fans, ductwork, curtains or square footage? Well, the good news is that you can with a catalytic drying robot for your prep deck.

 

You are probably familiar with infrared drying in a prep deck. Shops have been using infrared drying lights for some years now, but they have been slow to catch on. This situation is because they are bulky, heavy, and get dirty pretty quickly reducing their utility. Electric IR dryers are also very analog. They require a lot of user experience do dial in the temperatures and make sure you are not melting bumpers or boiling paint. For as sophisticated as Infrared drying can be in a shop, the electric IR dryers are nothing more than glorified toasters. 

7296

Learning From The Europeans

 

In Europe, cars get repaired differently. Everything in Europe is about maximizing space. Streets are narrower, and vehicles are smaller and so are the body shops. As a result of this, European body shops have had to figure out how to move more vehicles through small shops using innovative technologies such as infrared drying.

 

england auto body shop

 

The Italians have developed an infrared drying system that operates on LP or natural gas and is rail mounted, and robotic. This factor eliminates the need to drag around bulky electric IR arrays, move 220 Amp cords around, and keep the reflectors and bulbs clear of overspray. 

 

Screen Shot 2019-08-07 at 10.11.29 AM

 

How Gas Catalytic Dryers Help

 

While you don’t need an Infrared dryer to cure paint, catalytic dryers cure materials like primers in minutes. Gas catalytic dryers come mounted on a rail system, and one unit can service multiple bays. When you can cut dry times by half or more, you can get more vehicles through prep and into the paint booth. Gas catalytic dryers also eliminate the user error of electric IR dryers because the gas systems use temperature sensors to set and maintain surface temps. They can also switch panels on and off to achieve the desired results automatically. As shops seek new ways to squeeze more productivity out of an existing footprint, Gas Catalytic drying has proven time after time to cut production times without sacrificing quality.

 

Want to add Gas Catalytic drying toy our prep bays? Click below to speak with a distributor.

Contact Us

 

 

 

 

 

 

 

Topics: Gas Catalytic Drying, Collision Repair Trends